[Mar 13, 2023] 300-515 Practice Exam Dumps - 99% Marks In Cisco Exam
Updated Verified 300-515 Q&As - Pass Guarantee or Full Refund
Cisco 300-515 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
By finalizing training in any of the three formats, you will gain 40 CE credits that will count during recertification. Again, doing so prepares you to receive success in the exam. Some other benefits of passing through the training include the reinforcement of knowledge about fundamental concepts of MPLS VPN, including its pros as well as classification. Also, one gains insights into the configuration of optional paths in reference to traffic so that there is no network congestion. Therefore, if this is how you wish to prepare for the official exam and get ready for your upcoming job tasks, you need to enroll for official training. The specialists specifically targeted by this prep plan for exam 300-515 include network architects, network engineers, network managers, network administrators, network supervisors, network designers, and more. They will be garnering the comprehension of the techniques for executing, configuring, monitoring, and supporting solutions for SP VPN that are based on backbones for MPLS. Even as you consider registering for such a course, ensure you are aware of the prerequisites. They include having SP knowledge at the professional standard, which is equivalent to the content that you get from courses such as:
- Deploying Cisco SP Network Routing (SPROUTE);
- Building Cisco SP Next-Generation Networks Part 1 (SPNGN1) v1.2;
- Building Cisco SP Next-Generation Networks Part 2 (SPNGN2) v1.2.
NEW QUESTION 17
Refer to the exhibit.
If the two devices are operating normally, which two conclusions can you draw from this configuration?
(Choose two.)
- A. CE1 is supporting CSC.
- B. PE1 labels the routes it learns from CE1 with the route-target 111:1 and shares them with its VPNv4 peers.
- C. The PE-CE routes between the devices are being exchanged by OSPF
- D. PE1 labels the routes it learns from CE1 with the route-target 222:2 and shares them with its VPNv4 peers.
- E. CE1 must use OSPF to establish a neighbor relationship with PE1.
Answer: C,E
NEW QUESTION 18
Refer to the exhibit.
Drag and drop the EVC configuration items from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 19
Refer to the exhibit.
Which statement about this command is true?
- A. It is used to set the router that will server as the root bridge for STP.
- B. It must be configured on each PE router to enable the PE routers to receive multicast traffic for this particular MVRF.
- C. It is used to set the designated router on a link using PIM-SM.
- D. It must be configured on the PE and CE router to enable MP-BGP to send labels for CSC.
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr1000/configuration/guide/chassis/asrswcfg/ lsmmldp.html
NEW QUESTION 20
Refer to the exhibit.
Which effect of this configuration is true?
- A. It configures VPWS single homed.
- B. It configures VPWS multihomed.
- C. It configures MPLS traffic engineering.
- D. It configures an IPv4 peering with 192.168.1.1
Answer: A
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSPG-2798.pdf
NEW QUESTION 21
In an Ethernet Virtual Circuit environment, which restriction do bridge domains have when STP is running?
- A. Bridge domains must be mapped to a different VLAN.
- B. Bridge domains must belong to different MST instances.
- C. The STP mode must be MSTP
- D. The STP mode must be RSTP or PVST+
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/ce/b_ce_xe-313s- asr920-book/b_ce_xe-313s-asr920- book_chapter_01.html#reference_770349446ED24E83821EF701DDC46BFD
NEW QUESTION 22
Refer to the exhibit:
A network engineer is implementing an OSPF configuration Based on the output, which statement is true?
- A. OSPFv3 cannot be configured for IPv4; OSPFv3 works only for IPv6.
- B. In the ospfv3 1 area 1 ipv4 command, area 0 must be configured instead of area 1.
- C. OSPFv3 does not run for IPv4 on FastEthemet0/0 until IPv6 routing is enabled on the router and IPv6 is enabled on interface Fastfc.thernet0/0
- D. IPv6 routing not enabled" is just an informational message and OSPFv3 runs for IPv4 on interface FastEthernet0/0 anyway
Answer: C
NEW QUESTION 23
An ISP provides a major client MPLS VPN for managed services. The MPLS engineering team needs to use the advanced VPN feature of selective VRF import so that only specific prefixes are present in the required VPNs.
Which aspect of this feature must the team consider?
- A. A route is imported into the VRF only when at least one RT that is attached to the route matches one RT that is configured in the VRF and the route is permitted by the import route map.
- B. The routers that are imported in the VRF can be BGP and IGP routes, so other match conditions in the route map, besides communities, can be used.
- C. The import-map command is applied under the PE interface that connects to the CE router.
- D. A route must pass the import route map first and then the route target import filter.
Answer: A
NEW QUESTION 24
Which condition must be met before an environment can support CSC?
- A. The CSC-PE and the CSC-CE must support IPv6.
- B. The CSC-PE and CSC-CE devices must be able to send labels to one another using BGP.
- C. The CSC-PE and CSC-CE must each be able to ping an interface in its respective global routing table.
- D. The CSC-CE must support OSPFv3.
Answer: B
NEW QUESTION 25
Which statement describes the no bgp default route-target filter command?
- A. Prefixes that are received with route targets and distinguisher are accepted.
- B. Prefixes that are received with route targets that are not imported at the PE are not accepted.
- C. Prefixes that are received with route targets and distinguisher are not accepted.
- D. Prefixes that are received with route targets that are not imported at the PE are accepted.
Answer: D
NEW QUESTION 26
What is a requirement to share VRF reachability information to all members of a VPN when using IPv6?
- A. All PEs must have the same VRFs configured.
- B. PE routers must have MPLS disabled and be running MP-BGP between all P and PE routers.
- C. PE and CE routers must be running BGP as the PE-CE routing protocol
- D. PE routers must be running MP-BGP and bgp default ipv4-unicast must be disabled
Answer: A
NEW QUESTION 27
Which method can be used to discover targeted LDP neighbors dynamically when configuring VPLS between PE routers?
- A. BGP autodiscovery
- B. VPWS
- C. BGP
- D. VPLS peers under the VFI
Answer: A
NEW QUESTION 28 
Refer to the exhibit. Which statement about this configuration is true?
- A. Router 1 has statically defined thresholds for data MDT.
- B. Router 1 will accept multicast routes with a route-target of 12:1.
- C. The MVRF must be configured on each router on the customer and service provider networks.
- D. 192.168.1.2 must be reachable by all routers participating in the mvpn-intranet MVRF.
Answer: B
Explanation:
Section: Layer 3 VPNs
NEW QUESTION 29
Which is the primary function of a MPLS L3 VPN route target?
- A. It imports the external routes it identifies into VRFs that support Internet traffic
- B. It imports and exports identified routes into selected VRFs.
- C. It uniquely identifies NLRIs that have the same numeric value.
- D. It supports QoS by classifying traffic by file type when it applies MPLS EXP bits to each packet.
Answer: B
NEW QUESTION 30 
An engineer is trying to configure an EVPN VWPS. What is the issue with this configuration?
- A. Interface GigabitEthernet0/1/0 should not have any IP address.
- B. The service instance and the EVPN instance are different.
- C. The 12vpn evpn command should be instance 101.
- D. The member in the VPWS context should be the PE-facing interface.
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-3s/asr903/16-7-1/ b-mpls-l2-vpns-xe-16-7-asr900/epvn_vpws_single_homed.pdf
NEW QUESTION 31 
What is the effect of this configuration?
- A. The mroute table is cleared.
- B. Router 1 accepts multicast routes with a tag of 12:1
- C. A Cisco MPLS TE tunnel is generated with 192.168.1.2 as the source IP address of router 1.
- D. An LSP virtual interface tunnel is created.
Answer: B
NEW QUESTION 32
Refer to the exhibit. An engineer has configured router 1 to provide shared services to clients behind router 2.
To complete the implementation so that routes from router 1 are accepted, what must the engineer configure on router 2?
- A. with import route targets 201:202 and 401:402
- B. with export route targets 301:202 and 101:102
- C. with export route targets 201:202 and 401:402
- D. with import route targets 101:102 and 202:201
Answer: A
NEW QUESTION 33
An engineer is investigating an issue. Which command should an engineer use on a Cisco IOS XE device to display the contents of the LFIB?
- A. show mpls ldp labels
- B. show mpls forwarding-table
- C. show mpls ldp bindings
- D. show mpls ldp neighbors
Answer: B
NEW QUESTION 34
Refer to the exhibit.
While provisioning a new BGP session between the PE and CE router, you issue the as- override command.
Which statement describes modification of the prefix before being sent to the CE router (10.10.10.1)?
- A. The first and fourth autonomous systems change.
- B. The first AS changes, but no other autonomous systems change.
- C. The fourth AS changes, but no other autonomous systems change.
- D. The second and third autonomous systems change.
Answer: B
NEW QUESTION 35
In an Ethernet Virtual Circuit environment, which restriction do bridge domains have when STP is running?
- A. Bridge domains must be mapped to a different VLAN.
- B. Bridge domains must belong to different MST instances.
- C. The STP mode must be MSTP
- D. The STP mode must be RSTP or PVST+
Answer: C
NEW QUESTION 36
While configuring the VRF Selection feature, you get an error message after typing the below statement:
Router(config)#no vrf selection source 172.16.0.0 255.255.0.0 vrf VRF1
Which action caused this message?
- A. an attempt to remove a VRF Selection entry that does not exist
- B. an attempt to configure a VRF Selection table that does not exist
- C. the entry of an inconsistent IP address and mask for VRF Selection
- D. an attempt to configure a VRF instance on an interface that already has VRF Selection configured
Answer: A
NEW QUESTION 37
With Layer 3 MPLS VPN implementations on Cisco IOS XR PE routers, an interface is assigned to a VRF using the vrf command in which configuration mode?
- A. RP/0/RP0/CPU0:PE(config-bgp-af)#
- B. RP/0/RP0/CPU0:PE(config-vrf)#
- C. RP/0/RP0/CPU0:PE(config-bgp)#
- D. RP/0/RP0/CPU0:PE(config-if)#
Answer: D
NEW QUESTION 38
......
Cisco 300-515 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Duration | 90 minutes |
| Exam Code | 300-515 SPVI |
| Sample Questions | Cisco 300-515 Sample Questions |
| Recommended Training | Implementing Cisco Service Provider VPN Services (SPVI) |
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Exam Price | $300 USD |
| Number of Questions | 55-65 |
300-515 Real Valid Brain Dumps With 87 Questions: https://examboost.vce4dumps.com/300-515-latest-dumps.html