Verified & Correct NS0-183 Practice Test Reliable Source Nov 27, 2023 Updated

Free Network Appliance NS0-183 Exam Files Downloaded Instantly

Network Appliance NS0-183 (NetApp Storage Installation Engineer, ONTAP) Exam is a certification exam designed to test the knowledge and skills of IT professionals who work with NetApp storage solutions. NS0-183 exam covers a wide range of topics related to NetApp storage installation, configuration, and troubleshooting. NS0-183 exam is a must for anyone who wants to become a certified NetApp Storage Installation Engineer and work with NetApp storage solutions.

Passing the NS0-183 exam is a requirement for several NetApp certifications, including the NetApp Certified Storage Installation Engineer, ONTAP Specialist certification. NetApp Storage Installation Engineer, ONTAP certification is recognized by companies and organizations around the world as a valuable credential for storage installation engineers who work with NetApp storage systems.

 

NEW QUESTION # 33
Click the Exhibit button.

You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)

• A. e0M-11
• B. e0b-11
• C. e0a-11
• D. e0M

Answer: A,D

NEW QUESTION # 34
After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.
In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?

• A. clustering ring show
• B. cluster show
• C. cluster image show
• D. cluster ha show

Answer: B

NEW QUESTION # 35
You are deploying a cluster with four AFF A300 nodes and Cisco 3232C switches. When you arrive at the customer's site, you notice that there are multiple breakout cables and four Cisco 3232C switches. In this scenario, which statement is true?

• A. A 4-node AFF A300 cluster requires four Cisco 3232C switches.
• B. A 4-node AFF A300 cluster requires two Cisco 3232C switches for the cluster interconnect and two for management.
• C. Cisco best practices require four Cisco 3232C switches for high availability.
• D. Your customer ordered a MetroCluster IP configuration.

Answer: D

NEW QUESTION # 36
You have to disable a switch that is connected to a port on your FAS2750. You notice that the LIFs that are associated with this port are migrated to a port that is not expected.
In this scenario, what would cause this behavior?

• A. The broadcast domain is configured incorrectly.
• B. The network failover port is not licensed.
• C. The network port is configured incorrectly.
• D. There are no online ports within the same failover group.

Answer: A

NEW QUESTION # 37
What are two ways to identify an AFF All SAN Array system? (Choose two.)

• A. Use the cluster image show CLI command.
• B. Use the san config show CLI command.
• C. View the ONTAP System Manager system nodes.
• D. View the ONTAP System Manager cluster settings.

Answer: B,C

Explanation:
Explanation
Ways to identify an ASA system You can identify an ASA system using ONTAP System Manager or using the ONTAP command line interface (CLI). From the ONTAP System Manager dashboard, you can click on the system nodes. The personality type is displayed as "ASA" for ASA systems. From the CLI, you can use san config show command. The ASA value returns as true for ASA systems

NEW QUESTION # 38
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?

• A. node management LIF
• B. SVM data LIF
• C. SVM management LIF
• D. intercluster LIF

Answer: D

NEW QUESTION # 39
What is the default shelf ID for disk shelves with IOM12 modules?

• A. 01
• B. 0
• C. 1
• D. 00

Answer: D

Explanation:
Reference:
https://library.netapp.com/ecm/ecm_download_file/ECMP12440699#:~:text=Visually%20verify%20that%20the%20ID,is%20the%20default%20shelf%20ID.

NEW QUESTION # 40
Click the Exhibit button.

You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?

• A. Configure protocols.
• B. Configure aggregates.
• C. Configure cluster LIFs.
• D. Configure a remote tier.

Answer: A

Explanation:
https://docs.netapp.com/us-en/ontap/task_configure_ontap.html

NEW QUESTION # 41
An administrator is installing a new AFF A220 HA pair and needs to convert two unified target adapter (UTA) ports from converged network adapter (CNA) to FC.
In this scenario, which action sequence will accomplish this task?

• A. 1. Set the port mode to fc. 2. Set the adapter to status-admin down. 3. Reboot the node. 4. Set the adapter to status-admin up.
• B. 1. Set the adapter to status-admin down. 2. Reboot the node. 3. Set the port mode to fc. 4. Set the adapter to status-admin up.
• C. 1. Set the adapter to status-admin down. 2. Set the port mode to fc. 3. Set the adapter to status-admin up. 4. Reboot the node.
• D. 1. Set the adapter to status-admin down. 2. Set the port mode to fc. 3. Reboot the node. 4. Set the adapter to status-admin up.

Answer: D

NEW QUESTION # 42
What is the maximum port speed of an Ethernet port on a Cisco Nexus 3232C cluster-interconnect switch?

• A. 200GbE
• B. 10GbE
• C. 100GbE
• D. 40GbE

Answer: D

NEW QUESTION # 43
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)

• A. FlexClone volumes
• B. Flash Pool
• C. thin provisioning
• D. FlashCache

Answer: B,D

NEW QUESTION # 44
What are two types of load balancing methods available in multimode interface groups? (Choose two.)

• A. port-based load balancing
• B. IP-based load balancing
• C. LIF-based load balancing
• D. broadcast domain-based load balancing

Answer: A,B

NEW QUESTION # 45
You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)

• A. quadpath HA
• B. multipath HA
• C. mixed-mode
• D. single path

Answer: B,C

NEW QUESTION # 46
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?

• A. Active IQ Config Advisor
• B. System Diagnostics
• C. Active IQ Unified Manager
• D. Cloud Insights

Answer: A

NEW QUESTION # 47
What is the maximum number of data disks that a RAID-TEC RAID group has?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

NEW QUESTION # 48
You are performing an automated upgrade of a 2-node cluster. Node-01 upgrades successfully. But during the node-02 upgrade, there is a power outage at the site. When power is restored and the nodes are booted, you receive this message: Warning: The Cluster is in a mixed version state. Update all of the nodes to the same version as soon as possible.
In this scenario, which command provides information that will help you understand the problem?

• A. system node image package show
• B. system node upgrade show-task-status
• C. system node image show
• D. system node upgrade-revert show

Answer: D

NEW QUESTION # 49
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?

• A. Active IQ Config Advisor worksheet
• B. Active IQ scheduled reports
• C. NetAppDocs output report
• D. ONTAP System Manager

Answer: B

NEW QUESTION # 50
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?

• A. NetAppDocs
• B. SnapGathers
• C. Active IQ OneCollect
• D. Inventory Collect Tool

Answer: A

NEW QUESTION # 51
When you install a new ONTAP 9.7 4-node cluster, which network type is required?

• A. cluster interconnect
• B. peering network
• C. intercluster network
• D. data network

Answer: A

NEW QUESTION # 52
Which three components are required when setting up a new ONTAP cluster? (Choose three.)

• A. node management IP
• B. Advanced Drive Partitioning
• C. cluster management IP
• D. password
• E. intercluster IP

Answer: A,C,D

NEW QUESTION # 53
......

Network Appliance NS0-183 certification exam is designed for IT professionals who want to validate their skills and knowledge in the installation and configuration of NetApp storage systems. NetApp Storage Installation Engineer, ONTAP certification is intended for individuals who work with NetApp storage systems and are responsible for implementing, configuring, and managing these systems in a production environment. The NS0-183 exam is one of the most prestigious and industry-recognized certification exams for storage installation engineers.

 

Pass Network Appliance NS0-183 exam Dumps 100 Pass Guarantee With Latest Demo: https://examboost.vce4dumps.com/NS0-183-latest-dumps.html